Bench Sand Rammer
Product Description
With dual-action sand wipers, a built-in muffler and a side exhaust, this tool is built for heavy use. Ideal for compacting small sand molds in a foundry or casting facility. Its shorter height and light weight allow this unit to be used on smaller molds that are set up waist high.
Specification
| Engine & Carrier | |
|---|---|
| Model | 130A1M |
| Bore in (mm) | 1 in. (25 mm) |
| Piston Stroke in. (mm) | 2.5 in. (63 mm) |
| Butt Diameter in. (mm) | 2.5 in. (64 mm) |
| Weight w/o Accessory lb (kg) | 11.56 lb (5.24 kg) |
| Length w/o Accessory in. (mm) | 21.5 in. (546 mm) |
| Air Inlet (in NPT) | 1/4" |
| 2115TiMAX 3/8" Impact Wrench | |
| Blows per Minute | 870 |
| Min Hose Size in. (mm) | 3/8" (10 mm) |
| 212 3/8" Impact Wrench | |
| Air Consumption @ Load cfm(L/min) | 14 cfm (396 L/min) |
Resources
| 03539574ed5e.pdf |
|---|
